Overview
Ronseal Decking Restorer will quickly and easily restore worn and weathered decking. A water based formula that works in just 15minutes to refresh and restore your decking’s natural appearance.
- Low odour
- Safe for plants and grass
- Restores weathered and grey decking
| Area | Exterior |
| Recommended Use | Ridged or smooth hardwood and softwood decking |
| Base | Water-Based |
| Coverage | 8m² per litre |
| Recommended Coats | 1 Coat |
| Application Method | Brush |
| VOC Levels | Low |
| Clean Up | Take as much Restorer as possible off your brush and then clean it in warm, soapy water. |
Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.
- To clean wood give it a good brush with a stiff brush to remove any dirt, debris or loose wood.
- Test Decking Restorer on a small area to make sure you're happy with the end results.
Application
Ensure the product is thoroughly mixed before starting application, it is recommended that a small test area is applied before treating the entire surface to ensure compatibility.
- Apply plenty of decking restorer onto a brush and work on around 3-4 boards at a time.
- Work into the surface of the decking by scrubbing with a stiff brush.
- Allow 15 minutes and then re-srcub before rinsing off with clean water.
- One application will normally be enough however in cases of extreme weathering you may need to apply again.
- Allow wood to dry completely before applying any oils, stains or paints. Usually around 2 days depending on weather conditions.
Note: Always follow the manufacturer instructions found on the tin.
